![background image](http://html1.mh-extra.com/html/ifm/al1330/al1330_operating-instructions-manual_3887894007.webp)
IO-Link master with EtherCAT interface DataLine 4 ports IP 65 / IP 66 / IP 67
7
2
Safety instructions
Content
General ..................................................................................................................................................... 7
Required background knowledge ............................................................................................................. 7
Safety symbols on the device ................................................................................................................... 7
IT security ................................................................................................................................................. 8
28333
>
2.1
General
58525
•
The device described is a subcomponent for integration into a system. The manufacturer is
responsible for the safety of the system. The system manufacturer undertakes to perform a risk
assessment and to create documentation in accordance with legal and normative requirements to
be provided to the operator and user of the system. This documentation must contain all
necessary information and safety instructions for the operator, the user and, if applicable, for any
service personnel authorised by the manufacturer of the system.
•
Read this document before setting up the product and keep it during the entire service life.
•
The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
•
Only use the product for its intended purpose (
→
Intended use
(
•
If the operating instructions or the technical data are not adhered to, personal injury and/or
damage to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering
with the product or incorrect use by the operator.
•
Installation, electrical connection, set-up, programming, configuration, operation and maintenance
of the product must be carried out by personnel qualified and authorised for the respective activity.
•
Protect units and cables against damage.
>
2.2
Required background knowledge
34185
This document is intended for specialists. Specialists are people who, based on their relevant training
and experience, are capable of identifying risks and avoiding potential hazards that may be caused
during operation or maintenance of the product.
The document contains information about the correct handling of the product.
>
2.3
Safety symbols on the device
34199
General warning
Observe instructions in chapter "Electrical connection" (
→
Electrical connection
(
>