7
UK
2
►
Reduce the sensitivity until the yellow LED
goes out�
3
►
Remove the object from the detection
zone�
> The yellow LED is lit again� The setting
operation is completed�
7 Operation
►
Check whether the unit operates correctly�
> The yellow LED is lit when the output is switched�
8 Maintenance, repair, disposal
►
Keep the lens of the sensor free from soiling�
►
For cleaning do not use any solvents or cleaning agents which could damage
the lens�
►
After use dispose of the unit in an environmentally friendly way in accordance
with the applicable national regulations�
Faulty sensors must only be repaired by the manufacturer�
Technical data and further information at www�ifm�com
