6
6.2.2 Sensitivity setting
The sensor is to switch when the object is detected
1
►
Set the setting potentiometer to the lowest
sensitivity�
►
Position the object to be detected in the
detection zone�
2
►
Increase the sensitivity until the yellow
LED lights�
3
►
Remove the object from the detection
zone�
> The yellow LED goes out� The setting
operation is completed�
The sensor is not to switch when the object is detected
1
►
Set the setting potentiometer to the high-
est sensitivity� The yellow LED is lit�
►
Position the object to be detected in the
detection zone�
