IFM Electronic efector300 SM0510 Скачать руководство пользователя страница 5

Страница: 5 / 45

Important note

Non-compliance can result in malfunction or interference�
Information

Supplementary note�

1.2 Warning signs used

CAUTION

Warning of personal injury�

Slight reversible injuries may result�

2 Safety instructions

• Please read this document prior to set-up of the unit� Ensure that the product is

suitable for your application without any restrictions�

• If the operating instructions or the technical data are not adhered to, personal

injury and/or damage to property can occur�

• Improper or non-intended use may lead to malfunctions of the unit or to un-

wanted effects in your application� That is why installation, electrical connec-

tion, set-up, operation and maintenance of the unit must only be carried out by

qualified personnel authorised by the machine operator�

• In order to guarantee the correct condition of the device for the operating time it

is necessary to use the device only for media to which the wetted materials are

sufficiently resistant (→ Technical data).

• The responsibility whether the measurement devices are suitable for the

respective application lies with the operator� The manufacturer assumes no

liability for consequences of misuse by the operator� Improper installation and

use of the devices result in a loss of the warranty claims�

• For medium temperatures above 50 °C some parts of the housing can heat up

to over 65 °C� Moreover, during installation or in case of a fault (e�g� housing

damage) media under high pressure or hot media can leak from the system� To

avoid personal injury, take the following measures:

► Install the unit according to the applicable rules and regulations�

► Ensure that the system is free of pressure during installation�

Содержание efector300 SM0510














































Результаты поиска

Содержание efector300 SM0510

Отзывы:

Бренды по названию

Популярные бренды

IFM Electronic efector300 SM0510, Руководство по эксплуатации

Результаты поиска

Содержание efector300 SM0510

Отзывы:

Бренды по названию

Популярные бренды