6
3
Remove the object from the detection zone.
►
The yellow LED goes out. The setting operation is
>
completed.
The sensor is not to switch when the object is detected
1
Set the setting potentiometer to the highest sensitivi-
►
ty. The yellow LED is lit.
Position the object to be detected in the detection
►
zone.
2
Reduce the sensitivity until the yellow LED goes out.
►
3
Remove the object from the detection zone.
►
The yellow LED is lit again. The setting operation is
>
completed.
Operation
7
Check whether the unit operates correctly.
►
The yellow LED is lit when the output is switched.
>