IFM Electronic Efector 160 LK1222, Руководство по эксплуатации

Страница: 57 / 75

Setting range for SP1, rP1
5. Empty adjustment
Empty adjustment to adapt OP
must be carried out when the
sensor is mounted.
It is allowed that the tank is part-
ly filled. Minimum distance (z)
between OP and medium:
Ensure that the minimum dis-
tances x and y are adhered to
(
→
page 52).
57
ENGLISH
y
z
x
OP
Press until cOP is
displayed.
Mode/Enter Set
Press and hold until the
display no longer
flashes.
Mode/Enter Set
If adjustment is success-
ful, rdy is indicated.
Return to the menu by
pressing a pushbutton.
Mode/Enter Set
*
Δ
L
=
increments
•
rP1 is always smaller than SP1, SP1 is always smaller than OP.
If the value for OP is reduced to a value
≤
SP1, the position of SP1 is shifted.
Reducing the value for SP1 to a value
≤
rP1 also shifts the position of rP1.
•
If the difference between rP1 and SP1 is small (approx. 3 x increment),
increasing rP1 also increases SP1.
•
If the difference between rP1 and SP1 is great, rP1 remains at the set value
even if SP1 is increased.
LK1222
cm inch cm inch cm inch
3.0 1.2 6.0 2.4 9.0 3.5
LK1223 LK1224
SP1
Δ
L*
LK1222
cm inch
2.5...19.0 1.0...7.6
0.5 0.2
rP1 2.0...18.5 0.8...7.4
LK1223
cm inch
4.0...39.0 1.4...15.2
0.5 0.2
3.5...38.5 1.2...15.0
LK1224
cm inch
6...58 2.5...22.5
1 0.5
5...57 2.0...22.0