Setting
D
max
must always be greater than D
min
!
Operation
Check the safe functioning of the unit.
If operation is correct no special measures need to be taken nor any
measures for maintenance and upkeep.
For operation and maintenance of the pulse pick-ups the manufacturer’s
instructions must be observed.
S1
S2
S3
H7
H6
S1
S2
S3
H7
H6
H7
H6
Set the maximum rotational speed of
the machine and keep it constant
LED H10 flashes in time
to the input pulses
Press the push-
buttons and
hold them until
LED H7 flashes
LED H7 is constantly lit
and flashes when D
max
is stored
Set the minimum rotational speed of
the machine and keep it constant
LED H10 flashes in time
to the input pulses
Press the push-
buttons and
hold them until
LED H6 flashes
LED H6 is constantly lit
and flashes when D
min
is stored
1
2
3
4
