Accessories
Rotational speed display for service and operation.
You can connect an external display on the terminal block X4 to display
the actual rotational speed.
Order no.: E80103
Technical Data
Nominal voltage
From 12V DC or 24V DC on-board system with
diesel generator set running
Inputs
power supply 12V/24V DC
via 3 screw terminals;
(without load-dump protection)
pulses proportional to the rotational speed from a
proximity switch;
including connection terminals for sensor supply
Output
1 floating changeover contact,current rating 8 A
Display
green LED : operating voltage
yellow LED : input pulses
green LED : relay status
2 red LEDs : programming
Logic
microcontroller with EEPROM,
programmed in Assembler
Accuracy
approx. 1% of programmed rotational
speed value
Housing
insulating material with transparent cover,
approx. 130 x 94mm base, approx. 60mm high
with 3 cable glands PG 11; protection rating IP 65
Connection
screw terminals up to 4mm
2
on PCB
Operating temperature
-20°C ... +60°C
