IFM Electronic E2D400 Series, Руководство пользователя

Страница: 94 / 160

Page 84
E2D400 Series Panel PC
Serial Port Number [COM1]
Use the Serial Port Number option allows to select the serial port used for remote
access.

COM1 D
EFAULT
System is remotely accessed through COM1

COM2
System is remotely accessed through COM2

COM3
System is remotely accessed through COM3
NOTE : Make sure the selected COM port is enabled through the Super I/O configuration
menu.
Base Address, IRQ [3F8h,4]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available

115200 8,n,1 D
EFAULT
 57600 8,n,1
 38400 8,n,1
 19200 8,n,1
 09600 8,n,1
NOTE:
Identical baud rate setting musts be set on the host (a management
computer running a terminal software) and the slave
Redirection After BIOS POST [Always]
Use the Redirection After BIOS POST option to specify when console redirection should
occur.