IFM Electronic E2D400 Series, Руководство пользователя, Страница: 43 / 160

E2D400 Series Panel PC
Page 33
Jumper Name Label Type
LVDS voltage selection J_VLVDS1 3-pin header
Touch Screen Select J1 4-pin header
Panel Type and Resolution J_LCD_TYPE1 10-pin header
Table 4-2: Preconfigured Jumpers
4.9.3 Clear CMOS Jumper
Jumper Label:
J_CMOS1
Jumper Type:
2-pin header
Jumper Settings:
See Table 4-3
Jumper Location:
See Figure 4-7
If the E2D400 fails to boot due to improper BIOS settings, the clear CMOS jumper clears
the CMOS data and resets the system BIOS information. To do this, use the jumper cap to
close the pins for a few seconds then remove the jumper clip.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
 Enter the correct CMOS setting
 Load Optimal Defaults
 Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in Table 4-3 .
Clear CMOS Description
Short 1 - 2 Keep CMOS Setup Default