IFM Electronic DTE800, Руководство по эксплуатации

Страница: 30 / 37

30
The action list must be selected from the drop-down list� The desired actions are now selected individually
from the action list and added to the action list in the sequence in which they are to be executed� Pressing
the [Delete action list] button clears down the selected list�
When the action list has been created, it is assigned under the "Assign input to action list header" to an
input and a selected flank� If it is desired to assign the list to both flanks, the assignment must be made
once for the positive flank and once for the negative flank�
The assignment can be cancelled again by a restart/reset of the reader or by assignment of the "No ac-
tion list" item�
Note
The action lists that are created are stored only in the RAM of the reader� On restarting the reader these
lists are deleted again�
7.5 Expert settings
The ReaderStart v2 software is a powerful tool for the configuration of the reader� It allows the reader to
be customised to any application� The expert settings 1 and 2 allow the reader's RF interface and com-
munications profile to be optimised to the tag so that the reader is optimally customised to the application�
7.5.1 Expert settings 1
There are eight parameter sets available for saving the configuration of the reader� All settings for the
transmission power, the antenna multiplex configuration, the RF settings and the air interface parameters
can be saved in these memory slots� Other parameters can be changed in [Expert settings 2]�
Figure: Expert settings 1 tab