28
2 INSTALLATION
2.1 TRANSPORT
`
in a longitudinal manner.
The counter is dispatched normally using transport
vehicles over land.
The normal packaging is made up from a
polyethylene covering and the company will supply
particular packaging, on request.
2.2 LIFTING AND HANDLING
The counter is lifted from the means of transport by
%$@<
ATTENTION!
The fork on the lifting truck must measure
at least 1m/3.2 ft, in length.
Position the display case by placing the
barycentre in the centre of the lighting
truck forks support area.
Once on the ground, it is recommended to remove
the packaging in order to be able to check integrity
and the absence of damage due to transport.
NOTE!
The carrier must be informed of any
damage immediately. In no case must
the damaged display unit be returned to
the manufacturer without forewarning or
previous written authorisation.
2.3 POSITIONING
Before installation, the following must be taken into
consideration:
-
remove all parts of the packaging protecting the
counter.
-
Position the counter in a dry, non-dusty place.
- A space must be envisioned around the Start Up
that is suitable for the operator (in order to carry
Fig. 5
Fig. 6
Содержание START UP Series
Страница 20: ...20 6 MESSA FUORI SERVIZIO nell ambiente ma rivolgersi alle agenzie di recupero materiali metallici e vetri...
Страница 92: ...92 6 PUESTA EN FUERA DE SERVICIO sino dir jase a las agencias de recuperaci n de materiales met licos y vidrios...
Страница 94: ......
Страница 95: ...IFI S p A Strada Selva Grossa 28 30 61010 TAVULLIA Pesaro Italy Tel 39 0721 20021 Fax 39 0721 201773...