IFB FASTCOOL CI12, Руководство пользователя

Страница: 29 / 54

25
•
•
•
•
•
The air conditioner is fitted with a Hot
Start function that delays the starting
of the air conditioner for a few seconds
to avoid an immediate outflow of hot air.
Note In the Heat Mode, the air conditioner can
automatically activate a defrost cycle to remove
any frost from the condenser.
This usually lasts 2-10 minutes. During
defrosting, the fans stop turning. After
defrosting is complete, the air conditioner
automatically returns to the Heat Mode.
4 Timer Mode—Timer ON
Before setting the Start Time, choose the
mode and fan speed while the air
conditioner is ON.
Switch OFF the air conditioner.
Press the Timer button. Set the Start
Time by using the + and - buttons.
The time till the air conditioner switches
ON should be displayed. Then press
the Timer button again.
To cancel the set Start Time, press
the Timer button again.
Note In case of a power outage, it is necessary
to set the Start Time again.
5 Timer Mode—Timer OFF
To program the air conditioner to
automatically switch OFF, press the Timer
button. Set the Stop Time by using the +
and - buttons. The time till the air
conditioner switches OFF should be
displayed.
To cancel the set Stop Time, press the
TIMER button again.
Note In case of a power outage, it is necessary
to set the Stop Time again.
6 Fan Mode
In the Fan Mode, the air conditioner
works using only the fan.
To activate the Fan Mode, press the
Mode button until FAN appears on the
display.
Press the Fan button to change the fan
speed as follows: Low, Medium, High.
The fan speed set will be stored in
memory.
•
•
•
•
•
Flexi
Sleep/
Flexi
Sleep/
Flexi
Sleep/