background image

2

SRL Series

2

Specifi cations

Chapter 2

 

SPECIFICATIONS

For convenience to the user, the pertinent specifi cations are given in an 

OPERATION GUIDE

, shown in Figures 

2-1 and 2-2, affi

  xed to the case of the instrument.

SPECIFICATIONS 

Accuracy and other specifi cations: 

See Table 2-1.

Retrace:

1 Ω to 19 MΩ

: Permanent shift in resistance value 

is <2 ppm for 23°C to 0°C to 23°C cycle, and 23°C 
to 40°C to 23°C cycle

Calibration Report:

Initial SI traceable calibration data provided in 
0.5°C in cre ments for temperature range of 18°C to 
28°C as shown in Figure 2-2.

Calibration Conditions:

Three of four-wire Kelvin measurements, low 
pow er, at 23°C; two wire for 1 MΩ and over. 
Traceable to SI

Terminals:

Gold-plated, tellurium-copper, low-thermal-emf binding 
posts on standard 3/4 inch spacing. A 

GROUND

 terminal 

is provided on all units.
≤190 kΩ: four 5-way binding posts for 4-terminal  
 

         measurement

<190 kΩ: two 5-way binding posts
≥100 MΩ: two 5-way binding posts with 

GUARD

Other available terminals:

• 

DMM direct input compatibles

• 

bnc, Triax, and custom connectors

Transit Case:

Optional 

Model SRC-100

 lightweight transit case 

with handle, suitable for transporting and storing 
two units. The case provides mechanical protection 
and insulation from temperature chang es dur ing 
trans por ta tion or shipping.

Dimensions:

8.6 cm H x 10.5 cm W x 12.7 cm D (3.4” x 4.15” x 5”)

Weight:

0.73 kg (1.6 lb) 

Figure 2-1:  OPERATION GUIDE affi xed to unit

Figure 2-2:  Temperature Calibration Chart

JOS

19-Jun-2002

SRL-1

B2-9240246

N/A

1.000 003 3 

N/A

N/A

SRL-1   STANDARD RESISTOR

±2 ppm

±3 ppm

18°C to 28°C 
0.5 V

500 mA
8 ppm per year max; 2 
ppm typical.
<2 ppm for for max. 
temp. cycles.

-1.6E-07

-2.4E-08

19-Jun-2001

23.0°C

Adjustment to Nominal:

Max. Change from 23°C

value (18°C to 28°C):

Operating Temperature

Range:

Max. Voltage:

Max. Current:

Stability:

Retrace:

Date Calibrated

Temperature (°C)

Relative Humidity

Resistance R

Test Conditions

Meas. Uncertainty

By

Recommended Due

 www.ietlabs.com

IET LABS, INC.

534 Main Street, Westbury, NY 11590

800-899-8438 • 516-334-5959

(FAX) 516-334-5988

Model:

SN:

R

t

= R

23

[1 +

 α

( t - 23 ) +

β

 ( t - 23 )

2

];

   α

=

β

=

23

JOS

19-Jun-2001

1.000 003 3 

SRL-1

B2-9240246

0

-1.6E-07

-2.4E-08

3.0

2.9

2.1

1.9

2.7

2.6

2.4

2.3

3.4

3.3

3.2

3.1

3.5

3.5

3.6

3.6

3.6

3.6

3.5

1.000 002 1 

1.000 003 5 

1.000 003 5 

1.000 003 4 

1.000 003 4 

3.5

3.4

1.000 001 9 

1.000 003 3 

1.000 003 2 

1.000 003 1 

1.000 003 0 

1.000 002 9 

1.000 002 7 

1.000 002 6 

1.000 002 4 

1.000 002 3 

1.000 003 5 

1.000 003 5 

1.000 003 6 

1.000 003 6 

1.000 003 6 

1.000 003 6 

28.0

26.0

26.5

27.0

27.5

24.0

24.5

25.0

25.5

22.0

22.5

23.0

23.5

20.0

20.5

21.0

21.5

18.0

18.5

19.0

19.5

Temperature Calibration Chart

Model:

SN:

Alpha:

Report No:

Beta:

Temperature

(°C)

Deviation from

Nominal

(ppm)

Measured value at 23°C:

Date:

By:

IET LABS, INC.

• (516) 334-5959
• (800) 899-8438

• 534 Main Street, Westbury, NY 11590

Traceable to NIST

Resistance

Содержание SRL Series


















Отзывы: