IES Keywatt 19, Руководство пользователя

Страница: 14 / 36

www.ies-synergy.com
User Manual
DIM016199-EN
14
Plug connections
I
WARNING
HAZARD OF ELECTRIC SHOCK OR DAMAGE TO THE CHARGING STATION
• Hazardous voltages may be present on both the charger input and output connections.
• Do not use this product if the cables (input or output) are frayed, have damaged insulation
or any other signs of damage.
• A cord extension set or second cable assembly or adaptator must not be used in addition
to the coupler/cable assembly for the connection into the vehicle.
Failure to follow these instructions will result in death or serious injury.
AC input connector
Use the AC input cable ref FLPLA012536 for this equipment.
5-wire plug :
MENNEKES AM-TOP 32A 3P+N+T 400V plug
4m FLPLA012536
If the power cable is damaged it must be replaced with a new cable.
I
WARNING
HAZARD OF ELECTRIC SHOCK OR DAMAGE TO THE CHARGING STATION
• To protect against electric shocks in the event of a fault, make sure that the protective
earth conductor of the mains power supply is correctly connected before switching on the
power.
• The input must be connected to the power supply by a CCID (Charging Circuit Interrupting
Device) rated 32A with an opening contact gap for all poles that provides full disconnection
in Category III overvoltage.
Failure to follow these instructions will result in death or serious injury.