5.3
C
LOSING AND
L
OCKING THE
P
RINTHEAD
A
SSEMBLY
5.3.1 Procedure
CAUTION
Before reinstalling the printhead, make sure the rotating
pins on each side of the printhead (3) are correctly
positioned in their respective seats on the printer.
- Rotate the printhead (3) toward the front of the printer.
- Rotate the printhead support (2) toward the front of the printer,
onto the printhead (3).
- Press firmly on the green tab at the front of the printhead support
(2) until the assembly clicks into the locked position.
CAUTION
When locking the printhead support (2), make sure you
clearly hear two clicks indicating that the two levers (1)
have snapped back into position in their respective
seats.
Ensure that the printhead support (2) is solidly locked in
position.
- If no other service operation is to be performed on the printer :
close the printer cover,
reconnect the data cable,
reconnect the power cord,
power up the printer
and load the printer with paper.
IER 400B
User Guide
Page 40
N0C402B Rev. 1
July 6, 2009
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization