2
CONNECTING THE PRINTER AND POWER-UP
2.1
C
ONNECTING THE
P
RINTER
WARNING
This appliance must be grounded.
This product must exclusively be connected to an
electrical circuit that is:
-
Provided with a Ground Fault Circuit Interrupter
(GFCI) complying with IEC 364 and NFC 15-100
regulations, and
-
conforming
with
the
voltage
characteristics
specified by the NF EN 50160 standard.
2.1.1 Procedure
To connect the printer, simply proceed as follows:
- Connect it to the AC power
- Connect it to the data communications system (PC, network).
Note:
To be compatible with certain applications, the printer may require
the installation of additional programs and specific configurations
(contact IER Technical Support).
IER 400B
User Guide
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
Page 15
N0C402B Rev. 1
July 6, 2009