3.5
M
EDIA
L
OADING
Preliminary Steps: - Adjust the paper width, see page 26
- Power up the printer, see page 20.
3.5.1 Paper Load Procedure
- Insert the first document from the box or roll between the two
insertion paper guides.
- Move the document inwards until it is captured by the printer.
Note:
Once the document has been fed correctly:
- the printer initializes, adjusting the paper position to the program
parameters and the type of document separation marks,
- a blank document is ejected. If automatic separation is not
available, the user must separate the document manually, see
page 32.
Figure 3.8
Loading Paper
IER 400B
User Guide
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
Page 29
N0C402B Rev. 1
July 6, 2009