background image

i420 

User Guide 

 

 

Ce document est la propriété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite 

This document is the property of IER and may not be reproduced or communicated without prior written 

authorization. 

Page 3 

N0L802A1 

 

 

IMPORTANT SAFETY INSTRUCTIONS 

READ ALL OF THESE INSTRUCTIONS AND SAVE THEM FOR LATER REFERENCE. 

 

Follow all warnings and instructions marked on the product. 

  Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp 

cloth for cleaning. 

  Do not use this product near water. 

  Do not place this product on an unstable cart, stand or table. The product may fall, causing serious 

damage to the product. 

  Slots and openings on the cabinet and the back or bottom are provided for ventilation. 

  To ensure reliable operation of the product and to protect it from overheating, do not block or cover these 

openings. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar 

surface. This product should never be placed near or over a radiator or heat register. This product should 

not be placed in a built-in installation unless proper ventilation is provided. 

  This product should be operated from the type of power source indicated on the marking label. 

  If you are not sure of the type of power available, consult your dealer or local power company. 

  This product is equipped with a three-pronged plug, a plug having a third (grounding) pin. This plug will 

only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into 

the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the 

grounding-type plug. 

  Do not allow anything to rest on the power cord. Do not locate this product where the cord will be walked 

on. 

  If an extension cord is used with this product, make sure that the total of the ampere ratings on the 

products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure 

that the total of all products plugged into the wall outlet does not exceed 15 amperes for 120V outlet and 

7.5 amperes for 220V-240V outlet. 

  Never push objects of any kind into this product through cabinet slots as they may touch dangerous 

voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any 

kind on the product. 

  Except as explained elsewhere in this manual, don't attempt to service this product yourself. Opening and 

removing those covers that are marked "Do Not Remove" may expose you to dangerous voltage points or 

other risks. Refer all servicing on those compartments to service personnel. 

  The mains plug on this equipment must be used to disconnect mains power. Please ensure that the socket 

outlet is installed near the equipment and shall be easily accessible. 

  Unplug this product from the wall outlet and refer servicing to qualified service personnel under the 

following conditions: 
a.  When the power cord or plug is damaged or frayed. 

b.  If liquid has been spilled into the product. 

c.  If the product has been exposed to rain or water. 

d.  If the product does not operate normally when the operating instructions are followed. Adjust only 

those controls that are covered by the operating instructions since improper adjustment of other 

controls may result in damage and will often require extensive work by a qualified technician to restore 

the product to normal operation. 

e.  If the product has been dropped or the cabinet has been damaged. 

f.  If the product exhibits a distinct change in performance, indicating a need for service. 

Содержание I420





























Отзывы: