Ier 567, Руководство пользователя, Страница: 28 / 44

28
F
PERIODIC MAINTENANCE
Once a year, the printer, and the printhead and drive rollers in particular,
should undergo the dust removal and cleaning procedure described in
the Level 1 Maintenance Manual.
Depending on the media used and the environment, it may be necessary
to increase the printer cleaning frequency.
This dust removal and cleaning procedure entails three essential
operations:
•
Removal of any dust and fluff from the printer (including the paper
path, sensors and burster blade)
•
Printhead, platen, drive roller and solenoid cleaning
•
Final checks
CAUTION:
We recommend the use of the IER cleaning kit (IER P/N S32132A) to carry
out these maintenance operations.
1) General Printer Cleaning
Refer to the figure on page 27.
a) Power down the printer and open the operator access door.
b) Remove the media from the rear feeders and remove any
documents from the front stacker and the reject bin.
c) Raise the magnetic module (1) and hold it in this position.
d) Open the hinged paper guide (2).
e) Pull the rear feeder assembly flange (3) and rotate it into its up-
position.
f) Using the compressed air can in the cleaning kit, IER P/N
S32132A, remove the dust from the entire paper path.
g) Lower the magnetic module into its locked position.
h) Return the hinged paper guide to its closed position.
i) Return the rear feeder assembly flange to its original position.
F
Before starting any cleaning operation make sure you have
disconnected the AC power cable and the data I/O cable
from the printer.