Ier 567 Скачать руководство пользователя страница 23

 

 

23

2) User Interface Key Functions  

a)  On-Line Mode  

In this mode the following keys are active: 

 

Key  

Function  

Description  

On/Off Line 
Menu  

key

 

Switching to the 

Menu Navigation 

mode  

Pressing this key switches the printer to the 

Menu

 

Navigation 

(

Off-Line)

 mode and 

allows you to scroll through the various 
menus.  

Esc 

key

 

Clears the warning 
and error 
messages  

Use this key to clear the warning messages 
from the LCD. Also press this key to recover 
from an error condition, once you have 
solved the problem. 
Pressing this key when no message is 
displayed has no effect, except on coupons 
inserted through the front feed slot: They are 
ejected from the printer when this key is 
pressed (and no message displayed).  
The 

Esc

 key does not change the mode of 

operation, the printer stays in

 On-Line

 

mode. 

b)  Menu Navigation Mode 

In this mode the following keys are active: 

 

Key Function 

Description 

On/Off line 
Menu 

key

 

Switching to the 

On-Line

 mode 

This key can be considered a shortcut to the 

On-Line

 mode. It can be used any time to 

stop navigation and to exit the 

Menu 

Navigation 

mode, no matter where you are 

located in the menus.  

Up-Arrow 

key

 

Navigation 

Down-Arrow 

key

 

Navigation 

These two arrow keys let you navigate 
through the various submenus. They directly 
control the 

Æ

-

cursor that indicates which 

submenu you

 

can select.  

Содержание 567













































Отзывы: