Print More Materials, All For Application
34
7.3 Print
Problem
Solution
Problem 1: Prompt #1 or #2 no material, cannot
print properly
Add material at the filament-warning test
Problem 2: The print appears to be detached
from the bottom and is carried away
After determining that the platform is able to
print that material, adjust the platform and nozzle
gap when the zero point is small (
see Printing -
Installing the Build Platform and Leveling for
more information
)
Problem 3: Dual head printing does not work well
together
According to the
maintenance - nozzle spacing
adjustment
spacing
Problem 4: Use of automatic unload filament, but
stuck between extrusion gear and extrusion
clamp
Remove the extrusion clamp and cut off the
deformed front end of the material
7.4 Clean Up Carbon Blockage
Problem
Solution
Problem 1: Print again after a pause in printing
cannot be extruded
Pull out the feed tube above the print head
Remove the filaments and cut off the expanded
filaments s at the front end and reload them.
Causes: The distance of the pumping back is too
long, the material is inside the throat, and the
time between printing is heated, which causes the
