IEI Technology WSB-9452, Руководство пользователя

Страница: 99 / 266

WSB-9452 PICMG 1.0 CPU Card
Page 81
Figure 5-1: Make sure the CPU socket retention screw is unlocked
Step 2: Inspect the CPU socket. Make sure there are no bent pins and make sure the
socket contacts are free of foreign material. If any debris is found, remove it with
compressed air.
Step 3: Correctly position the CPU. Make sure the pin 1 mark matches the cut edge
on the CPU socket. Carefully place the CPU on top of the socket. When properly
placed, the CPU should be easily inserted into the socket.
Step 4: Insert the CPU. To insert the CPU into the socket, hold the CPU by its edges
and follow the instructions below:
Step 5: Correctly orientate the CPU with the IHS (Integrated Heat Sink) side facing
upward.
Step 6: Locate the pin 1 mark on the CPU.
Step 7: Gently insert the CPU into the socket.
Step 8: Rotate the retention screw into the locked position. (See Figure 5-2 )