IEI Technology WSB-9452, Руководство пользователя

Страница: 250 / 266

WSB-9452 PICMG 1.0 CPU Card
Page 232
D.2.4 Configure the RAID BIOS
The next step is to configure the RAID BIOS. To do this, follow the steps below.
Step 1: Restart the system.
Step 2: During POST, the system prompts the user to press < C
TRL
> and < J > to enter
the RAID Setup Utility ( Figure D-1 ).
Figure D-1: Enter the RAID Setup Utility
Step 3: The main RAID Setup Utility menu opens ( Figure D-2 ). To move from one
window to another, press the Tab key. Below is a brief description of each
window.
Main Menu – This window lists the different actions you can perform in the
RAID Setup Utility.
Hard Disk Drive List – This window lists the SATA disk drives installed and
the following information about the disks:
o
Model name
o
Capacity
o
Type/Status (RAID or non-RAID)
RAID Disk Drive List – This window is empty if no RAID volume is configured.
If a RAID volume is configured, the following information is displayed:
o
Model name (user-defined RAID volume name)
o
RAID level
o
Capacity
o
Status
o
Member disks’ corresponding numbers