IEI Technology TANK-801-BT, Руководство пользователя

Страница: 33 / 112

TANK-801 Em b e d d e d S ys te m
P a g e 21
3.4 S ys te m Fa n In s ta lla tio n
To install the optional system fan, please follow the steps below:
S te p 1: Remove the two retention screws on the rear panel and loosen the two
thumbscrews on the front panel, slide the cover inwards, and then lift the cover
up gently ( Figure 3-4 ).
S te p 2: Unplug the SATA signal and power cables connected to the TANK-801, and then
place the cover on a flat surface ( Figure 3-5 ).
S te p 3: Attach the system fan to the TANK-801 and secure it by four retention screws
( Figure 3-8 ).
Figure 3-8: System Fan Installation
S te p 4:
Connect the system fan cable to the CPU_FAN connector on the motherboard
of TANK-801.
S te p 5:
Reconnect the SATA signal and power cables to the TANK-801.
S te p 6: Reinstall the cover.
3.5 P lu g g a b le DC-In Te rm in a l Blo c k In s ta lla tio n
To install the pluggable DC-in terminal block, please follow the steps below: