IEI Technology TANK-801-BT, Руководство пользователя

Страница: 24 / 112

TANK-801 Em b e d d e d S ys te m
P a g e 12
2.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the TANK-801 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the TANK-801. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the TANK-801 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the TANK-801, place it on an
antic-static pad. This reduces the possibility of ESD damaging the TANK-801.
2.2 Un pa c kin g P re c a u tio n s
When the TANK-801 is unpacked, please do the following:

Follow the anti-static precautions outlined in Section 2.1 .

Make sure the packing box is facing upwards so the TANK-801 does not fall
out of the box.

Make sure all the components shown in Section 2.3 are present.