IEI Technology PPC2-C ADL Series, Руководство пользователя

Страница: 77 / 87

PPC2-Cxxx-ADL Series Panel PC
Page 65
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the PPC-Cxxx-ADL.
B.1.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
◼ Follow the electrostatic precautions outlined below whenever the device
is opened.
◼ Make sure the power is turned off and the power cord is disconnected
whenever the PPC-Cxxx-ADL is being installed, moved or modified.
◼ To prevent the risk of electric shock, make sure power cord is
unplugged from wall socket. To fully disengage the power to the unit,
please disconnect the power cord from the power outlet. Refer servicing to
qualified service personnel. The power outlet shall be readily available and
accessible.
◼ Do not apply voltage levels that exceed the specified voltage range .
Doing so may cause fire and/or an electrical shock. Use a power cord that
matches the voltage of the power outlet, which has been approved and
complies with the safety standard of your particular country.
◼ Electric shocks can occur if the PPC-Cxxx-ADL chassis is opened when it
is running. To avoid risk of electric shock, this device must only be
connected to a supply mains with protective earth.
◼ Do not drop or insert any objects into the ventilation openings of the
PPC-Cxxx-ADL.
◼ If considerable amounts of dust, water, or fluids enter the device , turn
off the power supply immediately, unplug the power cord, and contact the
PPC-Cxxx-ADL vendor.