IEI Technology PPC2-C ADL Series Скачать руководство пользователя страница 32

Страница: 32 / 87

PPC2-Cxxx-ADL Series Panel PC

Page 20

3.1

Anti-static Precautions

WARNING:

Failure to take ESD precautions during the maintenance of the PPC-Cxxx-

ADL may result in permanent damage to the PPC-Cxxx-ADL and severe

injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the power module. (Dry climates are especially susceptible to ESD.) It is therefore

critical that whenever the PPC-Cxxx-ADL is opened and any electrical component handled,

the following anti-static precautions are strictly adhered to.

◼

Wear an anti-static wristband:

Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

◼

Self-grounding:

Before handling the board, touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

◼

Use an anti-static pad:

When configuring the PPC-Cxxx-ADL, place it on

an anti-static pad. This reduces the possibility of ESD damaging the PPC-

Cxxx-ADL.

3.2

Installation Precautions

During installation, be aware of the precautions below:

◼

Read the user manual:

The user manual provides a complete description

of the PPC-Cxxx-ADL, installation instructions and configuration options.

◼

DANGER! Disconnect Power:

Power to the PPC-Cxxx-ADL must be

disconnected during the installation process. Failing to disconnect the power

may cause severe injury to the body and/or damage to the system.

◼

Qualified Personnel:

The PPC-Cxxx-ADL must be installed and operated

only by trained and qualified personnel. Maintenance, upgrades, or repairs

may only be carried out by qualified personnel who are familiar with the

associated dangers.

Содержание PPC2-C ADL Series
























































































Результаты поиска

Содержание PPC2-C ADL Series

Отзывы:

Похожие инструкции для PPC2-C ADL Series

Бренды по названию

Популярные бренды

IEI Technology PPC2-C ADL Series, Руководство пользователя

Результаты поиска

Содержание PPC2-C ADL Series

Отзывы:

Похожие инструкции для PPC2-C ADL Series

Бренды по названию

Популярные бренды