background image

 

 

NOVA-9152 and NOVA-9102 5.25” Motherboard 

Page 147

 

Power Button Mode [On/Off] 

Use the 

Power Button Mode

 BIOS to specify how the power button functions. 

 

On/Off D

EFAULT

 

When the power button is pressed the system is either 

turned on or off 

 

Suspend 

 

When the power button is pressed the system goes into 

suspend mode 

 

Resume on PME# [Disabled] 

Use the 

Resume on PME#

 BIOS option to enable activity on the PCI PME (power 

management event) controller to rouse the system from a suspend or standby state. 

 

Disabled D

EFAULT

 

Wake event not generated by PCI PME controller 

activity 

 

Enabled 

 

Wake event generated by PCI PME controller activity 

 

Resume on PCIE WAKE# [Enabled] 

The 

Resume on PCIE WAKE#

 BIOS option specifies if the system is roused from a 

suspended or standby state when there is activity on the PCI-Express bus. 

 

Disabled  

Wake event not generated by PCI-Express activity 

 

Enabled D

EFAULT

 

Wake event generated by PCI-Express activity 

 

Resume on Ring [Disabled] 

Use the 

Resume on Ring

 BIOS option to enable activity on the RI (ring in) modem line to 

rouse the system from a suspend or standby state. That is, the system will be roused by 

an incoming call on a modem.   

 

Disabled D

EFAULT

 

Wake event not generated by an incoming call 

Содержание NOVA-9102











































































































































































































































































Отзывы: