IEI Technology NANO-ULT5, Руководство пользователя

Страница: 70 / 147

NANO-ULT5 SBC
Page 56
4.4 M.2 Module Installation
To install an M.2 module, please follow the steps below.
Step 1:
Locate the M.2 module slot. See
Chapter 3
.
Step 2: Remove the retention screw secured on the motherboard.
Step 3: Line up the notch on the module with the notch on the slot. Slide the M.2 module
into the socket at an angle of about 20º ( Figure 4-5 ).
Figure 4-2: Inserting the M.2 Module into the Slot at an Angle
Step 4: Secure the M.2 module with the previously removed retention screw
( Figure 4-6 ).
Figure 4-3: Securing the M.2 Module