IEI Technology NANO-LX2 Скачать руководство пользователя

Страница: 75 / 183

NANO-LX2 EPIC NANO Motherboard

Page 59

5.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before the NANO-LX2 is installed. All

installation notices pertaining to the installation of NANO-LX2 should

be strictly adhered to. Failing to adhere to these precautions may lead

to severe damage of the NANO-LX2 and injury to the person installing

the motherboard.

5.2.1 Installation Notices

WARNING:

The installation instructions described in this manual should be

carefully followed in order to prevent damage to the NANO-LX2,

NANO-LX2 components and injury to the user.

Before and during the installation please

the following:

Read the user manual

The user manual provides a complete description of the NANO-LX2

installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD)

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.

Place the NANO-LX2 on an antistatic pad

When installing or configuring the motherboard, place it on an antistatic pad.

This helps to prevent potential ESD damage.

Turn all power to the NANO-LX2 off

When working with the NANO-LX2, make sure that it is disconnected from all

power supplies and that no electricity is being fed into the system.

Содержание NANO-LX2
























































































































































































Результаты поиска

Содержание NANO-LX2

Отзывы:

Похожие инструкции для NANO-LX2

Бренды по названию

Популярные бренды

IEI Technology NANO-LX2, Руководство пользователя

Результаты поиска

Содержание NANO-LX2

Отзывы:

Похожие инструкции для NANO-LX2

Бренды по названию

Популярные бренды