IEI Technology NANO-LX2 Скачать руководство пользователя

Страница: 104 / 183

NANO-LX2 EPIC NANO Motherboard

Page 88

Enabled

Activates automatically when the system boots up

causing a warning message to appear when anything

attempts to access the boot sector or HDD partition table.

Disabled

(Default)

No warning message appears when there is an attempt

to access the boot sector or HDD partition table.

CPU Internal Cache [Enabled]

Use the

CPU Internal Cache

option to enable or disable the internal CPU cache.

Disabled

The internal CPU cache is disabled.

Enabled

(Default)

The internal CPU cache is enabled.

Boot From LAN Control [Disabled]

Use the

BOOT From LAN Control

option to enable the system to be booted from a

remote system.

Disabled

(Default)

The system cannot be booted from a remote system

through the LAN.

Enabled

The system can be booted from a remote system

through the LAN.

Boot Device

Use the

Boot Device

options to select the order of the devices the system boots from.

There are three boot device configuration options:

First Boot Device [Default: HDD-0]

Second Boot Device [Default: CDROM]

Third Boot Device [Default: SCSI]

Using the default values, the system first looks for a HDD to boot from. If it cannot find an

HDD, it boots from a CD-ROM. If both The HDD and the CD-ROM are unavailable, the

system boots from a SCSI drive.

Содержание NANO-LX2
























































































































































































Результаты поиска

Содержание NANO-LX2

Отзывы:

Похожие инструкции для NANO-LX2

Бренды по названию

Популярные бренды

IEI Technology NANO-LX2, Руководство пользователя

Результаты поиска

Содержание NANO-LX2

Отзывы:

Похожие инструкции для NANO-LX2

Бренды по названию

Популярные бренды