IEI Technology NANO-LX2, Руководство пользователя

Страница: 78 / 183

NANO-LX2 EPIC NANO Motherboard
Page 62
Step 4: Open the SO-DIMM socket arms . Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down. (See Figure 5-1 )
Step 5: Secure the SO-DIMM . Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket. Step 0:
5.2.4 CF Card Installation
NOTE:
The NANO-LX2 can support both CF Type I cards and CF Type II
cards. For the complete specifications of the supported CF cards
please refer to Chapter 2 .
To install the a CF card (Type 1 or Type 2) onto the NANO-LX2, please follow the steps
below:
Step 1: Locate the CF card socket . Place the NANO-LX2 on an anti-static pad with the
solder side facing up. Locate the CF card.
Step 2: Align the CF card . Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card . Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-2 . Step 0: