IEI Technology NANO-KBN-i1 Скачать руководство пользователя страница 82

Страница: 82 / 158

NANO-KBN-i1

P a g e 68



iWDD Ve n d o r



The

iWDD Vendor

displays the installed iWDD vendor. The fields in

iWDD

Vendor

cannot be changed.



iWDD Ve rs io n



The

iWDD Version

displays the current iWDD version. The fields in

iWDD

Version

cannot be changed.

The System Overview field also has two user configurable fields:



S ys te m Da te [xx/xx/xx]

Use the

System Date

option to set the system date. Manually enter the day, month and

year.



S ys te m Tim e [xx:xx:xx]

Use the

System Time

option to set the system time. Manually enter the hours, minutes

and seconds.

5.3

Ad va n c e d

Use the

Advanced

menu (

BIOS Menu 2

) to configure the CPU and peripheral devices

through the following sub-menus:

WARNING!

Setting the wrong values in the sections below may cause the system

to malfunction. Make sure that the settings made are compatible with

the hardware.

Содержание NANO-KBN-i1































































































































































Результаты поиска

Содержание NANO-KBN-i1

Отзывы:

IEI Technology NANO-KBN-i1, Руководство пользователя, Страница: 82 / 158

Результаты поиска

Содержание NANO-KBN-i1

Отзывы: