IEI Technology NANO-KBN-i1 Скачать руководство пользователя страница 115

Страница: 115 / 158

NANO-KBN-i1

P a g e 101

NOTE:

Installing unsupported OS versions may cause the recovery tool to fail.

B.2

S e tu p P ro c e d u re fo r Win d o ws

Prior to using the recovery tool to backup or restore, a few setup procedures are required.

S te p 1:

Hardware and BIOS setup (see

Section B.2.1

)

S te p 2:

Create partitions (see

Section

B.2.2

)

S te p 3:

Install operating system, drivers and system applications (see

Section

B.2.3

)

S te p 4:

Build the recovery partition (see

Section

B.2.4

)

S te p 5:

Create factory default image (see

Section

B.2.5

)

Step

The detailed descriptions are described in the following sections.

NOTE:

The setup procedures described below are for Microsoft Windows

operating system users. For Linux, most of the setup procedures are

the same except for several steps described in

Section B.3

B.2.1

Ha rd wa re a n d BIOS S e tu p

S te p 1:

Make sure the system is powered off and unplugged.

S te p 2:

Install a hard drive or SSD in the system. An unformatted and unpartitioned disk

is recommended.

S te p 3:

Connect an optical disk drive to the system and insert the recovery CD.

S te p 4:

Turn on the system.

Содержание NANO-KBN-i1































































































































































Результаты поиска

Содержание NANO-KBN-i1

Отзывы:

IEI Technology NANO-KBN-i1, Руководство пользователя, Страница: 115 / 158

Результаты поиска

Содержание NANO-KBN-i1

Отзывы: