IEI Technology NANO-KBN-i1 Скачать руководство пользователя страница 142

Страница: 142 / 158

NANO-KBN-i1

P a g e 128

S te p 2:

Continue to configure the

Boot Option Priorities

BIOS option of the client

system:

Boot Option #1



remain the default setting to boot from the original OS.

Boot Option #2



select the boot from LAN option.

S te p 3:

Save changes and exit BIOS menu.

Exit



Save Changes and Exit

S te p 4:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe

in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

S te p 5:

Restart the client system from LAN. If the system encounters a Blue Screen of

Death (BSoD) or a hang for around 10 minutes, it will automatically restore from

the factory default image. The following screens will show when the system

starts auto recovering.

Содержание NANO-KBN-i1































































































































































Результаты поиска

Содержание NANO-KBN-i1

Отзывы:

IEI Technology NANO-KBN-i1, Руководство пользователя, Страница: 142 / 158

Результаты поиска

Содержание NANO-KBN-i1

Отзывы: