IEI Technology KINO-9652 Скачать руководство пользователя страница 199

Страница: 199 / 269

KINO-9652 Mini-ITX SBC

Page 177

7.7 Realtek HD Audio Driver (ALC883) Installation

To install the Realtek High Definition (HD) Audio driver, please follow the steps below.

NOTE:

This driver only needs to be installed if an external audio kit with a

RealTek ALC883 codec is installed.

7.7.1 BIOS Setup

Step 1:

Enter the BIOS setup. To do this, reboot the system and press

during POST.

Step 2:

Go to the Southbridge Configuration menu. Enable the High Definition Audio

controller.

Step 3:

Press

F10

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

7.7.2 Driver Installation

To install the audio driver please follow the steps below.

Step 1:

Select

AUDIO

from the list in

Figure 7-2

Step 2:

A new window opens (

Figure 7-42

Содержание KINO-9652














































































































































































































































































Результаты поиска

Содержание KINO-9652

Отзывы:

IEI Technology KINO-9652, Руководство пользователя, Страница: 199 / 269

Результаты поиска

Содержание KINO-9652

Отзывы: