IEI Technology KINO-9652 Скачать руководство пользователя страница 148

Страница: 148 / 269

KINO-9652 Mini-ITX SBC

Page 126

device after the start unit command.

40 Sec

POST waits 40 seconds for the USB mass storage

device after the start unit command.

Device ##

The

Device##

field lists the USB devices that are connected to the system.

Emulation Type [Auto]

Use the

Emulation Type

BIOS option to specify the type of emulation BIOS has to

provide for the USB device.

NOTE:

Please note that the device’s formatted type and the emulation type

provided by the BIOS must match for a device to boot properly. If both

types do not match then device’s behavior is undefined. To make sure both

types match, format the device using BIOS INT13h calls after selecting the

proper emulation option in BIOS setup. The FORMAT utility provided by

Microsoft® MS-DOS®, Microsoft® Windows® 95, and Microsoft®

Windows® 98 can be used for this purpose.

Auto D

EFAULT

BIOS auto-detects the current USB.

Floppy

The USB device will be emulated as a floppy drive.

The device can be either A: or B: responding to

INT13h calls that return DL = 0 or DL = 1

respectively.

Forced FDD

Allows a hard disk image to be connected as a

Содержание KINO-9652














































































































































































































































































Результаты поиска

Содержание KINO-9652

Отзывы:

IEI Technology KINO-9652, Руководство пользователя, Страница: 148 / 269

Результаты поиска

Содержание KINO-9652

Отзывы: