IEI Technology KINO-9652 Скачать руководство пользователя страница 168

Страница: 168 / 269

KINO-9652 Mini-ITX SBC

Page 146

system.

Enabled D

EFAULT

The HECI message is enabled when booting up the

system.

HECI Message [Enabled]

Use the

HECI Message

BIOS option to enable or disable HECI message.

Disabled

The HECI message disabled.

Enabled D

EFAULT

The HECI message enabled.

End Of Post S5 HECI Message [Enabled]

Use the

End Of Post S5 HECI Message

option to enable or disable HECI message when

the system is in the off (S5) state.

Disabled

The HECI message is disabled when the system is off.

Enabled D

EFAULT

The HECI message enabled when the system is off.

ME-HECI [Enabled]

The

ME-HECI

option is enabled by default and can not be changed.

ME-IDER [Disabled]

Use the

ME-IDER

option to enable or disable the IDE-Redirection (IDE-R) function on an

AMT-capable system.

Disabled D

EFAULT

The IDE-R function is disabled.

Enabled

The IDE-R function allows an AMT-capable client system

to access IDE devices and load OS from a management

system. When an IDE-R session is established, the

virtual drives are shown in the system.

Содержание KINO-9652














































































































































































































































































Результаты поиска

Содержание KINO-9652

Отзывы:

IEI Technology KINO-9652, Руководство пользователя, Страница: 168 / 269

Результаты поиска

Содержание KINO-9652

Отзывы: