IEI Technology KINO-9652 Скачать руководство пользователя страница 131

Страница: 131 / 269

KINO-9652 Mini-ITX SBC

Page 109

IDE disk drives on the specified channel.

ARMD

This option specifies an ATAPI Removable Media

Device. These include, but are not limited to:

ZIP

LS-120

LBA/Large Mode [Auto]

Use the

LBA/Large Mode

option to disable or enable BIOS to auto detects LBA (Logical

Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the

maximum drive capacity is 137 GB.

Disabled

BIOS is prevented from using the LBA mode control on

the specified channel.

Auto D

EFAULT

BIOS auto detects the LBA mode control on the specified

channel.

Block (Multi Sector Transfer) [Auto]

Use the

Block (Multi Sector Transfer)

to disable or enable BIOS to auto detect if the

device supports multi-sector transfers.

Disabled

BIOS is prevented from using Multi-Sector Transfer on the

specified channel. The data to and from the device occurs

one sector at a time.

Auto D

EFAULT

BIOS auto detects Multi-Sector Transfer support on the

drive on the specified channel. If supported the data

transfer to and from the device occurs multiple sectors at

a time.

Содержание KINO-9652














































































































































































































































































Результаты поиска

Содержание KINO-9652

Отзывы:

IEI Technology KINO-9652, Руководство пользователя, Страница: 131 / 269

Результаты поиска

Содержание KINO-9652

Отзывы: