IEI Technology KINO-9152G4 Скачать руководство пользователя страница 22

Страница: 22 / 232

KINO-9152G4 Mini-ITX Motherboard

Page 2

1.1 Introduction

Figure 1-1: KINO-9152G4

The KINO-9152G4 Mini-ITX motherboard is an Intel® Pentium M and Intel® Celeron M

processor platform. The KINO-9152G4 has a maximum FSB of 533 MHz, supports up to

2 GB of dual channel 533 MHz DDR2 RAM, comes with LVDS and VGA graphics

interfaces and quad Broadcom PCI Express Gigabit Ethernet (PCIe GbE). Storage

options on the KINO-9152G4 include up to two SATA hard drives with transfer speeds of

up to 1.5 Gb/s, and two IDE hard drives (a CompactFlash® slot is available as an option).

Audio capabilities are enabled through an AC’97 audio codec onboard.

1.1.1 KINO-9152G4 Benefits

Some of the KINO-9152G4 benefits include:

Multiple display output options

Extended networking capabilities with four Ethernet ports

Storage flexibility with support for two 1.5 Gb/s SATA drives and two IDE

drives

PCIe for high-performance graphics

Optional Mini PCI port and CompactFlash® slot for system expansion

Содержание KINO-9152G4









































































































































































































































Результаты поиска

Содержание KINO-9152G4

Отзывы:

IEI Technology KINO-9152G4, Руководство пользователя, Страница: 22 / 232

Результаты поиска

Содержание KINO-9152G4

Отзывы: