IEI Technology KINO-9152G4 Скачать руководство пользователя страница 155

Страница: 155 / 232

KINO-9152G4 Mini-ITX Motherboard

Page 135

30 Sec

POST waits 30 seconds for the USB mass storage

device after the start unit command.

40 Sec

POST waits 40 seconds for the USB mass storage

device after the start unit command.

Device ##

The

Device##

field lists the USB devices that are connected to the system.

Emulation Type [Auto]

Use the

Emulation Type

BIOS option to specify the type of emulation BIOS has to

provide for the USB device.

NOTE:

Please note that the device’s formatted type and the emulation type

provided by the BIOS must match for a device to boot properly. If both

types do not match then device’s behavior is undefined. To make sure

both types match, format the device using BIOS INT13h calls after

selecting the proper emulation option in BIOS setup. The FORMAT

utility provided by Microsoft® MS-DOS®, Microsoft® Windows® 95,

and Microsoft® Windows® 98 can be used for this purpose.

Auto D

EFAULT

BIOS auto-detects the current USB.

Floppy

The USB device will be emulated as a floppy drive.

The device can be either A: or B: responding to

INT13h calls that return DL = 0 or DL = 1

respectively.

Forced FDD

Allows a hard disk image to be connected as a

floppy image. This option works only for drives

formatted with FAT12, FAT16 or FAT32.

Содержание KINO-9152G4









































































































































































































































Результаты поиска

Содержание KINO-9152G4

Отзывы:

IEI Technology KINO-9152G4, Руководство пользователя, Страница: 155 / 232

Результаты поиска

Содержание KINO-9152G4

Отзывы: