IEI Technology KINO-9152G4 Скачать руководство пользователя страница 178

Страница: 178 / 232

KINO-9152G4 Mini-ITX Motherboard

Page 158

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Intel® Chipset driver

VGA driver (Intel® Graphics Media Accelerator Driver)

LAN driver (Broadcom LAN Driver (for GbE LAN))

Audio driver (Realtek AC`97 Audio Driver (ALC665))

Installation instructions are given below.

7.2 Driver CD Auto-run

All the drivers for the KINO-9152G4 are on the CD that came with the system. To install

the drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the system does not initiate the "autorun" program when the CD is

inserted, click the Start button, select Run, then type X:\autorun.exe

(where X:\ is the system CD drive) to access the IEI Driver CD main

menu.

Содержание KINO-9152G4









































































































































































































































Результаты поиска

Содержание KINO-9152G4

Отзывы:

IEI Technology KINO-9152G4, Руководство пользователя, Страница: 178 / 232

Результаты поиска

Содержание KINO-9152G4

Отзывы: