IEI Technology KINO-690S1 Скачать руководство пользователя страница 45

Страница: 45 / 229

KINO-690S1 Mini-ITX Motherboard

Page 27

5V Power Supply

Some of the Super I/O features are described in more detail below:

2.6.4.1 Super I/O LPC Interface

The LPC interface on the Super I/O complies with the AMD

Low Pin Count Specification

Rev. 1.0. The LPC interface supports both LDRQ# and SERIRQ protocols as well as PCI

PME# interfaces.

2.6.4.2 Super I/O 16C550 UARTs

The onboard Super I/O has two integrated 16C550 UARTs that can support the following:

Two standard serial ports

IrDa 1.0 and ASKIR protocols

2.6.4.3 Super I/O Enhanced Hardware Monitor

The Super I/O Enhanced Hardware Monitor monitors three thermal inputs, VBAT

internally, and eight voltage monitor inputs. These hardware parameters are reported in

the BIOS and can be read from the BIOS Hardware Health Configuration menu.

2.6.4.4 Super I/O Fan Speed Controller

The Super I/O fan speed controller enables the system to monitor the speed of the fan.

One of the pins on the fan connector is reserved for fan speed detection and interfaced to

the fan speed controller on the Super I/O. The fan speed is then reported in the BIOS.

2.6.4.5 Super I/O Keyboard and Mouse Controller

The Super I/O keyboard and mouse controller can execute the 8042 instruction set. Some

of the keyboard and mouse controller features are listed below:

The 8042 instruction is compatible with a PS/2 keyboard and PS/2 mouse

Gate A20 and Keyboard reset output

Supports multiple keyboard power on events

Supports mouse double-click and/or mouse move power on events

Содержание KINO-690S1






































































































































































































































Результаты поиска

Содержание KINO-690S1

Отзывы:

IEI Technology KINO-690S1, Руководство пользователя, Страница: 45 / 229

Результаты поиска

Содержание KINO-690S1

Отзывы: