IEI Technology KINO-690S1 Скачать руководство пользователя страница 170

Страница: 170 / 229

KINO-690S1 Mini-ITX Motherboard

Page 152

On/Off

(Default)

When the power button is pressed the system is either

turned on or off

Suspend

When the power button is pressed the system goes into

suspend mode

Resume on Ring [Disabled]

Use the

Resume on Ring

option to enable the system to be roused from a suspended or

standby state when there is activity on the RI (ring in) modem line. That is, the system is

roused by an incoming call on a modem.

Disabled

(Default)

Wake event not generated by an incoming call

Enabled

Wake event generated by an incoming call

AT/ATX Power [ATX]

Use the

AT/ATX Power

BIOS option to select the power supply that is connected to the

system.

An AT power supply is connected to the system

ATX D

EFAULT

An ATX power supply is connected to the system

Restore on AC Power Loss [Last State]

The Restore on AC Power Loss BIOS option specifies what state the system returns to if

there is a sudden loss of power to the system.

Power Off

The system remains turned off

Power On

The system turns on

Last State

(Default)

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Содержание KINO-690S1






































































































































































































































Результаты поиска

Содержание KINO-690S1

Отзывы:

IEI Technology KINO-690S1, Руководство пользователя, Страница: 170 / 229

Результаты поиска

Содержание KINO-690S1

Отзывы: