IEI Technology JUKI-C400 Series, Руководство пользователя

Страница: 57 / 61

57
Appendix C.
How to use Wake-Up Function
JUKI-C400 provides two kinds of Wake-up function. This page
describes how to use Modem Wake-Up and LAN Wake-Up functions.
Wake-Up function only works with ATX power supply.
Wake-Up On Modem(Ring) :
You must set the option Wake-Up On LAN/Ring of CMOS SETUP to
be enabled. ATX power supply will be switched on when there is a ring
signal detected on pin “RI” of serial port.
Wake-Up On LAN :
When your computer is in power-down status, you can see LAN
Link/Active LED is flashing. This status indicates that the LAN chip has
entered standby mode and waits for Wake-Up signal. You can use other
computers to wake up yours by sending ID to it.
ID: ID is the MAC address of your system LAN. Every LAN chip has a
factory-set ID, which you can find it from network information in
WINDOWS.
ID’s format is xxxxxxxxxxxx
Example ID : 009027388320