IEI Technology JUKI-C400 Series, Руководство пользователя

Страница: 12 / 61

12
2.3 Unpacking Precautions
Some components on JUKI-C400’s are very sensitive
to static electric charges and can be damaged by a
sudden rush of power. To protect it from unintended
damage, be sure to follow these precautions:
ü
Ground yourself to remove any static charge
before touching your JUKI-C400 SBC. You can do
it by using a grounded wrist strap at all times or
by frequently touching any conducting materials
that is connected to the ground.
ü
Handle your JUKI-C400 SBC by its edges. Don’t
touch IC chips, leads or circuitry if not necessary.
ü
Do not plug any connector or jumper while the
power is on.
2.4 Clear CMOS Setup
To clear the CMOS Setup (for example, if you have
forgotten the password, you should clear the CMOS
and then re-set the password), you have to close the
J5 (2-3) for about 3 seconds, then open it. This will
put the system back to normal operation mode.
•
J5 : Clear CMOS Setup
J5 DESCRIPTION
1-2
(default)*
Keep CMOS Setup
(Normal Operation)
Short 2-3 Clear CMOS Setup