IEI Technology JUKI-C400 Series, Руководство пользователя

Страница: 30 / 61

30
Chapter 4 AMI BIOS Setup
4.1 Getting Start
This manual discusses AMI's Setup program built into
the ROM BIOS. The Setup program allows users to
modify the basic system configuration. This special
information is then stored in battery-backed RAM so
that it retains the Setup information when the power
is turned off.
4.2 Starting Setup
The AMI BIOS is immediately activated when you first
power on the computer.The BIOS reads the system
information contained in the CMOS and begins the
process of checking out the system and configuring it.
When it finishes, the BIOS will seek an operating
system on one of the disks and then launch and turn
control over to the operating system.
While the BIOS is in control, the Setup program can
be activated in one of two ways:
(1) By pressing <Del> immediately after switching the
system on
(2) By pressing the <Del>key when the following message
appears briefly at the bottom of the screen during the
post.
Press DEL to enter SETUP.
If the message disappears before you respond and
you still wish to enter Setup, restart the system to try
again by turning it OFF then ON or pressing the