manualshive.com logo in svg

IEI Technology JUKI-C400 Series, Руководство пользователя

Поделиться
Скачать
IEI Technology JUKI-C400 Series Скачать руководство пользователя страница 40

 

 

40

memory is  disabled.  

System BIOS Cacheable 

 When this option is set to enabled, the System ROM area from F0000-

FFFFF is copied (shadowed) to RAM for faster execution.  

C000,32k Shadow 

 When this option is set to enabled, the Video ROM area from C0000-

C7FFF is copied (shadowed) to RAM for faster execution.  

 Disabled :The contents of the video ROM are not copied to RAM.  
 Cached   :The contents of the video ROM area from C0000h - C7FFFh are 

copied from ROM to RAM and can be written to or read from cache 
memory. Enabled  :The contents of the video ROM area from C0000h - 
C7FFFh are copied (shadowed) from ROM to RAM for faster execution.

 

 

C800,16k Shadow 

 These options enable shadowing of the contents of the ROM area named 

in the option title. The settings are Enable Disable, Cached. The ROM 
area that is not used by ISA adapter cards will be allocated to PCI  
adapter cards.000,32k Shadow 

CC00,16k Shadow 

 These options enable shadowing of the contents of the ROM area named 

in the option title. The settings are Enable Disable, Cached. The ROM 
area that is not used by ISA adapter cards will be allocated to PCI adapter 
cards.800,16k Shadow 

D000,16k Shadow 

 These options enable shadowing of the contents of the ROM area named 

in the option title. The settings are Enable Disable, Cached. The ROM 
area that is not used by ISA adapter cards will be allocated to PCI  
adapter cards.C00,16k Shadow 

D400,16k Shadow 

 These options enable shadowing of the contents of the ROM area named 

in the option title. The settings are Enable Disable, Cached. The ROM 
area that is not used by ISA adapter cards will be allocated to PCI  

Содержание JUKI-C400 Series






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды