IEI Technology IOWA-GX Скачать руководство пользователя страница 153

Страница: 153 / 212

IOWA-GX CPU Board

Page 135

7.4.3 Create JBOD for Integrated Capacity

JBOD is defined as “Just a Bunch of Drives.”

JBOD provides neither performance gains

nor data redundancy.

WARNING!

All data previously stored on the member drives of a RAID

configuration is

destroyed

during the RAID initialization process. If

“used” drives are used to create a RAID array, make sure the data has

been moved or backed up before creating a RAID array out of the disk

drives.

Step 1:

Select

“

Create JBOD for Integrated Capacity”

. Use the arrow keys to highlight

Create JBOD for Integrated Capacity

and press

NTER

. A flashing ‘J’ appears

on the

Drive Menu

where the member drives to be included in the JBOD array

can be chosen.

Step 2:

Select RAID array drive members

. Use the space bar to select members of the

RAID array. The flashing cursor changes to a lower case ‘s’ once any of the

connected disk drives has been selected. Follow the same method to select

another member drive.

Step 3:

Confirm

. The

Create RAID 0 (Y/N)

confirm box appears. Press

Step 4:

Name the array

. Enter a nickname for the created array. Upper and lower case

alphabetic, numeric, space, and underscore characters are all applicable for

naming an array

Step 0:

Содержание IOWA-GX





















































































































































































































Результаты поиска

Содержание IOWA-GX

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IOWA-GX, Руководство пользователя

Результаты поиска

Содержание IOWA-GX

Отзывы:

Бренды по названию

Популярные бренды